PLC AUTOMATION SHORT COURSE – BASIC

One of the most dynamic and professional post-trade electrical training institutes in AustraliaPMV (Project Management Vision) is one of the most dynamic and professional post-trade electrical training institutes in Australia. PMV was established as a Registered Training Organisation (RTO) in 2005. Our campuses are located across Australia with head office in Perth, and other campuses in Adelaide, and Karratha. We are committed to providing high-quality training programs and have successfully trained more than 8500 students till now.PMV offers 20+ nationally recognised training programs and certificate courses in Electrical Equipment in Hazardous Areas (EEHA), Electrical Engineering, Instrumentation and Control, Plan and Perform High-Voltage Switching Operations, and Solar PV Design and Install with Battery Storage.Read MoreWe have a team of industry-based professional trainers who have over 260 years of combined industry experience. At PMV, students have access to state government funding available for many of our in-demand courses.Our courses align with AS/NZS and IEC standards and have been developed to encapsulate both theoretical and practical aspects of training, with a heavy focus on providing hands on experience with the latest industry trends in equipment and installation.PMV focuses on the growth and career opportunities of students by providing maximum possible exposure in site-based equipment and practices. We are listed as one of the finest training providers and electrical training institutes in Australia.CONTACT USProject Management Vision (PMV) is a Registered Training Organisation (RTO)We have been delivering nationally accredited training courses since 2005 in:Instrumentation and Control SystemsHazardous AreasElectrical SystemsRenewable EnergyHigh VoltageIndustrial FactoryOur campuses are in Perth, Adelaide, and Karratha, we can also deliver training at client sites, on request.PMV is a niche training provider. We excel at delivering competency-based training in accordance with the latest AS/NZS and IEC standards. Our training and education courses cover site-specific equipment and installation in Australia and worldwide.Our team specialises in operations support of existing plants in electrical, instrumentation and control, hazardous areas engineering, consultancy, design, testing, commissioning, audit, and education.PMV trainers share their in-depth industry experience with the course participants, contextualising training delivery to meet and embrace evolving trends in Australian and international markets in oil, gas, mineral processing, and renewable energy.PMV trainers have been practising professionals and have over 260 years of industrial experience between them.Company HistoryPMV has been operating since 2005 as an industry engineering consultancy in Hazardous Areas, Electrical Instrumentation and Project Management. Since then PMV has been consulting and delivering site specific instrumentation and Control system and hazardous area compliance solutions to latest AS/NZS and international industry standards.In 2008-09 PMV extended its scope of services to deliver nationally recognised training in hazardous areas and instrumentation, and later started delivery in renewable energy and high voltage.PMV Team has represented onTechnical Advisory Committee (TAC) for EEHA and Instrumentation, E-OzUtilities, Engineering, Electrical and Automotive (UEEA) Training CouncilTechnical Advisory Committee (TAC) for the UEG Gas Control SystemsCommunication Electrical and Plumbing Union CEPUInstitution of Engineers Australia (IE Aust)Institution of Instrumentation and Control (IICA)Hazardous Areas Installation LinkedIn forumarslide1To be responsive to the needs of the local community and industry sectors we serve to be flexible and adaptable to the changing needs of our stakeholders.Achievements19Years of Industrial Training Expertise8500Students Successfully Trained20+Technical Training & Certificate Courses

PMV Training

In PLC Automation, participants will set-up and arrange controller and HMI hardware and then write, test and troubleshoot simple programs.

10/22 Shields Cres

In PLC Automation short course, participants will set-up and arrange controller and HMI hardware and then write, test and troubleshoot simple programs. Functional requirements include operator control, status indication, alarms, and equipment maintenance policy.This training is suitable for electrician, electrical maintenance personnel and design engineers and those who need to familiarise themselves with programmable controller and automation technologies used in building, construction and industrial automation.PRE-REQUISITEOn successful completion of training and assessment, students who have already completed the UEECD0007* – (Apply work health and safety regulations, codes and practices in the workplace) will be issued with the units of competency,listed above.*Extra cost may be incurred if not an electricianTRAINING CONTENTYou will undergo one on one practical training with industry experienced, qualified Instrument and Electrical Professional Trainers. This will be in the following technologies on a purpose-built instrumentation skid/ facilities and control system with HART compliant field instruments and Siemens and Allen Bradley PLC Control System:<ul><li>Introduction to programmable controllers</li><li>Controller hardware (PS, CPU, signal modules)</li><li>Memory concepts, organisation and addressing</li><li>Basic data types (Boolean, Integer, Real, String)</li><li>Program digital and analog PLC.</li><li>Ladder Diagram (LD) programming languages</li><li>Structured programming with function blocks</li><li>Program elements include comparator, move, timer, counter, jump, shift registers and increment/decrement functions</li><li>Functional blocks Scaling and Un-scaling blocks</li><li>Integration of HMI touchpanel devices</li><li>Using simulation tools for testing programs</li><li>Download, test and fault find PLC program on PLC hardware TRAINING METHOD</li><li>Blended delivery of 30% theory and 70% practical training with what you are likely to see in a typical modern industrial environment with PLC control system.</li><li>Intensive hands-on installation, fault finding and commissioning experience</li><li>Quality time with PMV trainers to review the theory and discuss feedback on theory assessment</li><li>Practical exercises as part of the competency-based training outcome. <a href="mailto:info@pmv.net.au" title="mailto:info@pmv.net.au" target="_blank" data-msys-clicktrack="0" rel="nofollow noopener noreferrer">info@pmv.net.au</a> <a title="tel:1800%20768%20768" target="_blank" data-msys-clicktrack="0" rel="nofollow noopener noreferrer">1800 768 768</a></li></ul>RTO 51178 | RTO 52698 | EC 15472

PLC AUTOMATION SHORT COURSE – BASIC

More events from PMV Training

Discover more events from PMV Training, from Business to other experiences you might love.

Still looking for the right event?

Explore all events in Booragoon and filter by date, category, and more to find the perfect fit.

PLC AUTOMATION SHORT COURSE – BASIC

More events from PMV Training

Discover more events from PMV Training, from Business to other experiences you might love.

You might also like...

Browse more events with different dates, prices, and formats to find your next great experience.

Still looking for the right event?

Explore all events in Booragoon and filter by date, category, and more to find the perfect fit.