Oil & Gas Production Hands-On Training November @Perth Australia
$2,585 – $2,695
Oil & Gas Production Hands-On Training November @Perth Australia

Oil & Gas Production Hands-On Training November @Perth Australia

Event Information

Share this event
Date and Time
Location
Location
77 St Georges Terrace, Perth, WA 6000, Australia

View Map

Event description

Description

The Oil & Gas Production training course is the most practical and comprehensive course in the Oil and Gas industry. The emphasis of this course is on Oil & Gas separation, Gas dehydration and export, Oil treatment, stabilisation & export, Produced water treatment, Water & Gas injection at both onshore and offshore facilities. In addition to the engineering aspects of Oil & Gas production facilities, practical operating problems will also be covered, excluding emulsion treatment, sand handling, dealing with wax and asphaltenes, lube oil etc.

Key Learning Objectives:

  • Important specifications of Gas, Condensate & Oil
  • Understand the overall process of Oil and Gas production & separation
  • Understand the dynamics of each unit operations and their interaction
  • Process instrumentation & Control Implementation
  • Overpressure Protection (Relief and Flare) systems
  • Operational safety design & its implementation
  • Learn the concept of Integrated control in Oil & Gas separation process
  • Understand how safety is designed and implemented to have safe production of export Gas & liquid HC
  • Recognize the operating problems in Oil and Gas separation facilities
  • Learn interaction of DCS with process dynamics
  • Develop thorough understanding of Separation equipment, Heat transfer equipment, Pumps, Compressors and drivers
  • Brief understanding of Compressor control
  • Glycol dehydration – TEG Regeneration

About Simulator:

The Simulators utilised as a main instrument in the training courses are based on high fidelity dynamic simulation software – K-Spice® from Kongsberg Oil & Gas Technologies. K-Spice® is a dynamic process simulation solution designed for detailed simulation of Oil and Gas processes and control systems.

The simulator features High Fidelity Process and Utility models (typically found in an upstream Oil and Gas and LNG facility), generic Distributed Control System (DCS) & safety system, Alarm system and easy to use high-resolution graphical interface. The different process and utility sections of the simulator are capable of performing the required functions of relevant process facilities controlled by generic Distributed Control System (DCS) & safeguard by safety system.The simulator models high-fidelity modules that accurately reflect the behaviour of a real process. These simulators are designed especially for learning and training purposes. The models are robust and accurate over a wide range of operating conditions and is able to run both in real time and faster than real time. The simulator is an excellent visual aid to help enhancing the learning experience, and is designed to create a safe and informative environment for expanding knowledge in an effective way. Training can be set up for varying degrees of difficulty and adapted to target specific skills. These simulators demonstrate the real-life experiences trainees will encounter in the field.

Course Content:

  • Wells (16 off) & Inlet Manifolds
  • Gas – Oil Separation
  • Oil Treatment & Stabilisation
  • Oil Export
  • Gas Recompression
  • Gas Dehydration
  • Gas Export Compression
  • Glycol Regeneration
  • Produced Water Treatment
  • Cooling Medium
  • Seawater System
  • Water Injection
  • Closed Drain
  • HP Flare

Who Should Attend?

The training course is designed to put your knowledge & skills in practice. This technical course is aimed at:

  • Engineers (Process/Facility, Petroleum, Automation, Maintenance)
  • Designers
  • Operations Personnel
  • Field Supervisors
  • Project Managers

basically for all those involved with the selection, designing, installation, evaluation, or operation & management of Oil & Gas processing plants and related facilities.

Course Inclusion:

  • Extensive 4 days hands-on simulator based training
  • Computer per participant
  • Morning & Afternoon tea/coffee with snacks and light lunch
  • Course material
  • Goodies

Find more information at https://simtechoilngas.com.au/oil-gas-production-hands-on-training/

Share with friends
Date and Time
Location
77 St Georges Terrace, Perth, WA 6000, Australia

View Map

Save This Event

Event Saved