IPAS Medical Technologies Sector Workshop

Campus Map: http://www.adelaide.edu.au/campuses/mapscurrent/north_terrace.pdf (Grid Ref D12)

Agenda

1445 Arrival, registration and networking

1500 David Rush, Manager, Manufacturing, Industry & Innovation Division, Department of State Development

1510 Welcome – building links between local industry and universities: Prof. Andre Luiten, IPAS Director

1520 Series of 3-minute talks:

Industry Case Studies

1. Next Generation Mass Spectrometry Glassware – PCP project with IPAS
An introduction to Trajan Scientific and Medical
Andrew Gooley, Trajan
2. 3D Titanium Printing of Orthopedic Implants
Chris Henry, Austofix

Sensing

3. Cancer margin detection using an optical fibre pH probe
Dr Erik Schartner, IPAS, School of Physical Sciences
4. Using fibre Bragg gratings for optical manometry
Prof John Arkwright, Flinders University
5. Proteomic Sensing for disease detection
Prof Peter Hoffmann, IPAS Deputy Director, Adelaide Proteomics Centre Director
6. Using mid-infrared lasers for medical diagnostics
Prof David Lancaster, UniSA
7. Breath analysis using laser combs
Dr James Anstie, IPAS, School of Physical Sciences

Advanced materials
8. 3D Metal Printing for rapid prototyping and replacement parts:
Mr Luis Lima-Marques, IPAS Laboratory Manager
Photonics Catalyst Program

9. potential advances in 3D printed components for specialised uses
Mr Karan Gulati, PhD student, IPAS, School of Chemical Engineering

Photonics Catalyst Program

10. Program overview – Mr Piers Lincoln – IPAS Institute Manager – PCP Program Manager

1610 Tours of The Braggs

1655 Drinks, refreshments and networking

1730 Close